Sony PEG-N710C Add-on Application Operating Instructions Manual page 204

Troubleshooting – Frequently Asked Questions
Under Windows 98/98SE/Me
1
Right-click the My Computer icon and then click Properties from
the shortcut menu.
2
Click the Device Manager tab.
3
Press the HotSync button on the cradle.
4
If nothing happens in the Device Manager window, click
Refresh.
5
Click the
controller.
6
Click USB Switcher in the Windows task tray and then select Exit
from the shortcut menu.
7
Right-click SonyPEG Virtual Port (COM*) and then select
Remove while it is displayed.
8
Right-click SonyPEG and then select Remove while it is
displayed.
Tip
Chapter6
Additional information
of Port (COM & LPT) and Universal serial bus
Continued on next page
204