Sony RCP-1001 Operation Manual page 5

Connection example for MCS mode
Camera heads
• In MCS mode, be sure to set one of the multiple MSUs as the master. Not to turn off the power or disconnect the cable of
the master MSU during operation.
• The maximum number of devices that can be directly connected to the network is 96 excluding the master MSU. This
maximum number does not include any RCP connected by CCA cable to a CCU connected to the network or any CCU
connected by CCA cable to a RCP connected to the network. A client MSU is counted as one unit.
• A CNU and VCS cannot be connected to a system that will be used in MCS mode.
CCU
RCP-1000
RCP-1001
MSU-1000/1500
CCA-5 cable
LAN straight cable
(category 5 or above)
Overview
5