Local Network - D-Link DSL-2877AL User Manual

D-Link DSL-2877AL Modem Router User Manual
To access the Local Network page, click on the Setup menu link at the top, and then click on the Local Network menu link on the left.
On this page we can configure services related to the Local Area Network
connectivity of this product.
To configure the local network of 2877AL, do as follow:
Step1 In the Router IP Address textbox, enter the IP address of LAN interface. The
default IP address is 192.168.1.1. The Router IP address is the URL address for
loging in the Web configuration page.
Step2 Enter the Subnet Mask of LAN interface. If the Router IP address is
192.168.1.1, the range of subnet mask is from 255.255.0.0 - 255.255.255.254.
Step3 In the Domain Name textbox, set a domain name. If you leave it blank, a
domain name assigned by DHCP from the ISP is used.
Step4 Select Configure the second IP Address and Subnet Mask for LAN. It
enables the secondary LAN IP address for your router. It will be used when your
primary router IP address is in the same network segment with other LANs. The
Secondary router IP address must be in the different network segment from the
primary one.
Step5 Enter the secondary router IP address and subnet mask.
Step6 Configure DHCP Server.
Enable DHCP Server: Enable the router to assign IP addresses, IP default
gateway and DNS Servers to the host.
DHCP IP Address Range: It specifies the first IP address in the IP address
pool. The router assigns IP address that base on the IP pool range to the host.
DHCP Lease Time: The lease time determines the period that the host
retains the assigned IP addresses before the IP addresses change.
Enable DHCP Relay: Enable the message to transmit between clients in
different network segment.
Step7 Click Apply to make the settings take effect.

Local Network

Page 29