D-Link DSL-2877AL Modem Router User Manual
Step 2: Setup Internet Connection
In this step, the user can configure the Internet connection settings used by this
router.
We set the parameters of this page based on PPPoE protocol as example.
1.Select Country as India.
2.Select Internet Service Provider as your Internet Service Provider
3.Select DSL in WAN Mode drop-down list as defaults.
4.Setect ATM in DSL Mode drop-down list as defaults.
5.Set the protocol to be PPPoE.
6.Enter the VPI and VCI provided by your ISP.
7.Enter the Username and Password provided by your ISP.
8.Re-enter the password for confirmation.
Click the Back button to discard the changes made and return to the previous page.
Click the Next button to continue to the next page..
Click the Cancel button to discard the changes made and return to the main page.
Page 20