Phone From Your Pc - LG P970 User Manual

2
If you h ave previously connected
using a cable, run the New
Connection Wizard to create a
new connection.
3
Run the Connection Wizard on
the computer, select "Bluetooth
connection", then "Next".
4
The wizard starts searching
for Bluetooth-enabled mobile
phones. When the mobile phone
that you wish to connect to
appears, click "Stop" to stop
searching.
5
Select "LG-P970" from the
device list and click "Next". You
can rename the device if you
wish.
6
Enter the PIN code (e.g. "0000")
and click "Next".
7
On your mobile phone,
accept the request and enter the
same PIN code, then touch "OK".
8
Enter the On-Screen
Phone password and click "Next"
(the default password is "0000").
9
Touch "OK" to exit.
To check the phone to
PC connection
Once the devices have been
connected, drag down the notification
bar at the top of the home screen
to check the On-Screen Phone
connection status.
To disconnect your

phone from your PC

Click in the top left of the
On-Screen Phone window. Or drag
down the notification bar at the
top of the home screen and select
"On-Screen Phone". Touch "Yes" in
the Disconnect window.
NOTE: You must restart your phone
after shutting down the On-Screen
Phone service.
61