Power Cord; Maintenance And Care - Bissell 3535 Series User Manual

O
peration
Special tools
Combination upholstery/dusting brush tool:
Two types of cleaning tools are included in one
attachment: rotate for desired tool.
■ Use brush side to dust furniture, blinds,
books, lamps, shelves.
■ Use upholstery side for curtains,
draperies, cushions, fabrics.
Crevice Tool:
Extension Wand: Use with desired attachments for
NOTE: When using the hose for above floor
cleaning, make sure the powerfoot does not
tilt forward.

Power cord

When you are done using your BISSELL
PowerForce, return it to the upright position and
store the power cord.
1. Turn vacuum cleaner OFF.
2. Unplug power cord by grasping the polarized
plug (NOT the cord) and disconnect from outlet.
3. Loop power cord around cord wraps on side
of vacuum cleaner.
4. Clip molded plug to power cord to secure.
M
aintenance and care
To maintain maximum performance from your
BISSELL PowerForce, perform these simple
maintenance checks.
Bag change indicator (select models)
Select BISSELL PowerForce models are equipped
with a bag change indicator. This indicator monitors
the airflow through the dust bag and turns red to
indicate a reduction or blockage. The following
conditions may cause it to become completely red.
1. Dust bag is full; change the bag.
2. Dust bag is clogged with fine materials;
change the bag.
3. Clog in the vacuum; clear the clog.
w w w . b i s s e l l . c o m
ug603-5577_3525_107.indd 7 ug603-5577_3525_107.indd 7
Use in tight narrow spaces.
a longer reach.
Tip:
Your BISSELL PowerForce features
a Quick Release Cord Wrap. To
™
remove the power cord quickly and
easily, rotate the upper cord wrap
toward floor, and slip power cord from
upper and lower cord wrap.
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
Tip:
Vacuuming new carpet or fine powders
may clog the dust bag causing the
bag change indicator to turn red even
though the dust bag does not appear
to be fill. Change the dust bag to
restore maximum performance.
Bag Change
CHANGE BAG WHEN RED
Indicator
8 0 0 . 2 3 7 . 7 6 9 1
7
1/22/07 2:04:31 PM 1/22/07 2:04:31 PM