Page 1
PowerForce U S E R ’ S G U I D E 3525 SERIES Safety Instructions Product View Assembly Operations 7-10 Maintenance and Care 10-11 Troubleshooting Replacement Parts Consumer Services Warranty ug603-5577_3525_107.indd 1 ug603-5577_3525_107.indd 1 ® 1/22/07 2:04:23 PM 1/22/07 2:04:23 PM...
Page 2
Your BISSELL PowerForce is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast,...
■ Do not modify the polarized plug to fit a non-polarized outlet or extension cord. ■ Do not leave vacuum cleaner unattended when it is plugged in. ■ Unplug from outlet when not in use and before servicing.
roduct view Cord Clip Hose Clip Crevice Tool Extension Wand Twist ‘n Snap ™ Hose Tool Storage Clips Powerfoot CAUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. w w w . b i s s e l l . c o m ug603-5577_3525_107.indd 4 ug603-5577_3525_107.indd 4 Hose...
Locate and organize all parts before assembly. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL PowerForce for many years. ssembly The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.
Handle position Press the handle release pedal with your foot to place your BISSELL PowerForce into one of three cleaning positions. Upright- For storage and above floor cleaning with special tools. Normal Cleaning- Press handle release pedal once. Use for most household floor cleaning tasks.
NOTE: When using the hose for above floor cleaning, make sure the powerfoot does not tilt forward. Power cord When you are done using your BISSELL PowerForce, return it to the upright position and store the power cord. Turn vacuum cleaner OFF.
Replace dust bag Never reuse a dust bag. Use only BISSELL Style 7 Dust Bags in your BISSELL PowerForce. ® Style 7 EnviroFresh Micro Filtration Dust Bags (# 30861) Style 7 Dust Bags (# 32120). Unplug cleaner from electrical outlet.
Replace if worn. Check air passageway for obstructions. Remove debris from this area. Replace drive belt Use only BISSELL Style 7 Replacement Belts (#32074) in your BISSELL PowerForce. Unplug cleaner from electrical outlet. With rotating floor brush removed from vacuum...
Clearing clog The Hose on the back of the vacuum cleaner that carries the dirt from the powerfoot to the dust bag can sometimes become clogged. If you notice a change in the sound of the vacuum motor, check for clogs.
Contact us directly at 1-800-237-7691. eplacement Parts - BISSELL PowerForce You may purchase parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. Below is a list of common replacement parts. While not all of these parts may have come with your specific model, they are available for purchase if desired.
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for one year any defective or malfunctioning part.