Table of Contents
Advertisement
08/2008
3.2.4 Performing test series
Overview
Test series are used to automate measurements for condition monitoring to a great
extent. A test series can contain any number of measurement series. These meas-
urement series are performed one after the other in the defined order when a test
series is run. An machine operator is only required at the machine for the purpose
of starting the test series.
The measurements are made and measurement results stored without any further
operator actions.
Function description
The following entries have to be made to configure a test series:
Field
Name
Channel
Comment
To add, remove, or change the sequence of measurement series, these are se-
lected in the overview displayed and moved by dragging and dropping or using the
arrow buttons on the form.
A test series can only contain measurement series in one channel. It is not possible
to change the channel of a test series.
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 08/2008
3.2 Configuring measurements and measurement series
Content
Name of the test series. The system sug-
gests an automatically generated name,
which you can change. The names of test
series must be unique within the context of
the machine. The system adds another
element to the name automatically if the
name entered by the machine operator has
already been assigned to another test se-
ries.
Selects the required channel.
Any text entered to provide a detailed de-
scription of the test series
3 Setting up functions
Type
INPUT
SELECTION
INPUT
3-93
Advertisement
Table of Contents
