08/2008
Function
Filter time series
Test types:
Synchronous operation
axis test
Circularity test
Universal axis test
Filtering
Show/hide filter areas
Displaying diagrams of the selected time series
If the user clicks the "Display" text button under the time series selection tree, the
graphs for the selected time series are displayed.
Displaying the measurement results
You can view measurement results both on the machine operator panel and on the
PC. Trend curves produced by measurement series can only be viewed on the PC.
The warning and critical limits of the characteristics can give the machine operator
evaluation information about how far the qualitative state of the machine is from the
limit criterion.
Fig. 2-18: Examples of time series
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 08/2008
2.2 Measurements and measurement series
Description
This function opens the menu for the purpose
of filtering the measurement series displayed
in the selection. Measurement series can be
filtered according to the type of measurement
series.
The "Filtering" function causes the selected
filter setting to take effect.
This function shows or hides the entire filter
area.
2 Machine information
2-33