Babyhug B6BR035 User Manual page 6

HINT: If your vehicle is Two Wheels Driving Type, see the next page
please.
Driving Wheel
5
6
1. Slide the gear box onto the rear axle from Left Side. Keep the connector on the gear
box passes through the hole on the rear vehicle and out where the battery sits.
TYPE A-With Quick Installation: 2. Slide the driving wheel onto the rear axle, and keep
the driving wheel match with the gear box. Make sure you hear the wheel "snap" into
place.
TYPE B-With Driving Wheel Lock: 2. Slide the driving wheel on to the rear Alex.
3. Slide a Ø12 Washer onto the rear axle.
4. Tighten a locknut to the end of the rear axle with a spanner (provided).
5. Fit the driving wheel lock to the driving wheel.
6. Tighten two Ø4x10 round head screws to secure the lock to the driving wheel. Refer to
the operation on page 19.
7. Slide the Ø12 Washer onto the rear axle from right side.
8. Slide the Bushing onto the rear axle .
9. Slide a normal wheel onto the rear axle, and keep it match with the Bushing. Make sure
you hear the wheel "snap" into place.
1WD
Attach the Rear Wheels │ 5
3
4
2
8
7
Rear axle
1
Normal Wheel
9