Babyhug B6BR035 User Manual page 23

Battery operated rideon with remote control function
Table of Contents

Advertisement

• If your ride-on with a
will tell you how much power is remaining in the battery when you must
recharge the battery. Make sure the vehicle is stop!
BATTERY
6V4Ahx1, 6V7Ahx1
6V10Ahx1
6V4Ahx2, 6V7Ahx2,
6v10Ahx2,12V7Ahx1,
12V10Ah x1
1. Plug the charger port into the input socket. (the socket is below the seat)
HINT: If your vehicle equipped with the Multi-function Dash, the Charging
Socket is on the dash, please see page 15 <Use the Multi-function Dash>
2. Plug the charger plug into a wall outlet. The battery will begin charging.
This product with Charging Protection: when charging, all functions will be cut
off! Only an adult can charge and recharge the battery!
Charging │ 22
Digital voltmeter(IF EQUIPPED),
MAGNITUDE OF VOLTAGE
≥ 6.6
6.5~6.3
≤ 6.2
≥ 13.2
13.1~12.6
≤ 12.5
WARNING!
the magnitude of voltage
BATTERY STATE
The battery is full.
The vehicle can work normally.
The battery needs to be charge.
The battery is full.
The vehicle can work normally.
STOP operating the vehicle, the battery needs to be charge.
2
1

Advertisement

Table of Contents
loading

Related Products for Babyhug B6BR035

Table of Contents