Babyhug B6BR035 User Manual page 13

Normal Seat Assembly
1. Fit the tabs on the back of seat into the
slots on the rear vehicle.
2. Tighten four Ø4x12 flat head screws to
secure it with a screwdriver.
3. Tighten two Ø4x12 flat head screws to
secure the seat with a screwdriver.
Adjustable Seat Assembly (Operation on page 20)
1. Fit the pipes on the back of seat into the
holes on the rear vehicle.
2. Tighten four Ø4x12 flat head screws a
screwdriver.
3. Tighten two Ø4x12 flat head screws to
secure the seat with a screwdriver.
Attach the Seat │ 12
3
3
x4
2
x4
2
1
1
1