Restoring The Factory Settings - Korg monologue Owner's Manual

Restoring the Factory settings

You can restore the monologue's preset Programs and global settings to their
original factory-set state at any time.
1.
Begin with the monologue turned Off.
2.
While holding down the WRITE button and the EXIT button, turn the
monologue On.
"FACTORY RESET" will be indicated in the display.
3.
Turn the PROGRAM/VALUE knob to select the items you wish to reset
to the factory default settings.
PRESET: Restores the preset Programs (Programs 1–80) to their factory-set
default settings.
This will replace the existing preset Programs with the factory-set
default Programs. If you want to keep the existing preset Programs
beforehand, press the WRITE button to save the presets to the user
Programs (Programs 81–100).
GLOBAL: Restores the GLOBAL settings to their factory default settings.
This also includes any favorite Programs that you have registered.
ALL: Restores the preset Programs (Programs 1–80), Programs 81–100, and
GLOBAL settings to their factory-set default settings.
Use caution, as this will replace all data with the factory-set default
settings (which will erase your user Programs).
4.
Press the WRITE button.
The display will indicate the message "Are you sure?".
5.
Turn the PROGRAM/VALUE knob to select "Yes", and press the WRITE
button.
The factory-set default data will be reloaded, and the monologue will be
restored to its factory default state.
Press the EXIT button, or select "No" using the PROGRAM/VALUE
TIP
knob and press the WRITE button to cancel the operation.
Never turn off the monologue while data is being loaded.
49