Getting Started; Quick Overview; Unpacking; Inserting Batteries Into The Remote - Sony RCD-W7V Operating Instructions Manual

Sony operating instruction compact disc recorder operating rcd-w7v

Hide thumbs Also See for RCD-W7V:

Table of Contents

Getting Started

This chapter presents a quick overview so you can begin enjoying your new recorder right

away.

For selecting a language used in the on-screen display, refer to the page 41.

For selecting the aspect ratio of the TV to be connected, refer to the page 43.

Check that you have the following items:

• Video cord (1)

• Audio cords (2)

• Remote commander (remote) RM-R70 (1)

• R6 (size AA) batteries (2)

You can control the recorder using the supplied remote. Insert two R6 (size AA) batteries by

matching the 3 and # ends on the batteries to the markings inside the compartment. When

using the remote, point it at the remote sensor

Notes

• Do not leave the remote in an extremely hot or humid place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a

malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from

battery leakage and corrosion.

*RCD-W7V.p65_13-22

on the recorder.

continued

12/9/01, 6:11 PM

RCD-W7V 4-236-407-11(1)

Table of Contents