Assembly Instructions; Before You Start - Bissell 3300 Series User Manual

This User's Guide has been designed to help you get
the utmost satisfaction from your Go Vac Rechargeable
Cordless Sweeper. Enclosed you'll find assembly instructions,
tips for all cleaning tasks, safety precautions, plus
maintenance and troubleshooting instructions.

Before you start

Your Go Vac requires very little assembly. Remove it from the box and check it against the illustration to
familiarize yourself with the components listed. The exploded view drawing with part names will also be
helpful if you should need to order a part at a later time. Remember, components of your Go Vac may
vary depending on the model you purchased.
Quick and easy assembly
Assemble the Handle by screwing together the three (3) Metal
1.
Extension Handles. Place the colored Handle Grip on top of the
metal extension assembly and twist clockwise until secure.
Screw the D-shaped End to the bottom of the Metal Extension
Handle assembly.
Place bottom D-shaped End into the D-shaped opening at the
2.
top of the Go Vac. Push firmly until the button at the bottom
"clicks" into place in the opening.
Position Go Vac in Charging Base (if so equipped), making
3.
sure that the Go Vac Charging Port fits securely over the
Electrical Contact Post on the Charging Base.
Plug the Charging Base cord into a standard electrical outlet.
4.
The Indicator Light will glow red, showing that the unit is
charging.
NOTE: If you purchased Model 3301, the Charging Base is replaced by a
Charging Cord with Transformer Plug. The Transformer plugs into
standard electrical outlet (120v-60hz); plug the opposite end into the
port on the motor side of your Go Vac. Your Go Vac is now charging.
Model 3301 Charging Cord with
Transformer Plug
How to use this guide
Plug into Port on the Motor side
of your Go Vac
Please read this Guide thoroughly before using your
Go Vac. Pay particular attention to the parts diagram,
assembly instructions, and part names. Following the
Guide will greatly enhance your ability to get the
most performance from your Go Vac for many years.
WARNING:
Electric/electronic
appliances should not
be subjected to extreme
temperatures or high
humidity. Do not store
your Go Vac in bathing
areas or close to stoves,
furnaces or radiators.
Tip:
Fully charge
unit before
using. (See
Charging the
battery, page 6.
4