Rheem Comfort Control2 Installer's Manual page 6


Connect wires to terminal block on base.

Push excess wire into wall and plug hole with a fire resistant material (such as
fiberglass insulation) to prevent drafts from affecting thermostat operation.

Carefully line up the thermostat with the base and snap into place.
Removable Faceplate
The silver faceplate on the thermostat can
be removed and replaced with the white
faceplate included. To change the faceplate:

Remove faceplate by gently pulling on
the tabs behind the lower edge of the
faceplate. Lift faceplate off of thermostat.

Position faceplate on top edge of
thermostat.
Press on bottom of faceplate to snap faceplate
back into position.
6  Installer's Guide
Tabs