Rheem Comfort Control2 Installer's Manual page 30

Air Handler User Menus (cont.)
Setup
Parameter Options
Return Air Sens Off, On
Supply Air Sens Off, On
Reset All Dflts No, Yes
Dipswitch*
Dipswitch
Cool Airflow
HT Pump Airflow
Cool Air Adj
On-Demand Dehum On, Off
* Dipswitch status is not required when the system is set up for 4-wire
communications. It is only displayed when a conventional 24V thermostat
input is active.
30  Installer's Guide
If Return Air Sensor is field installed, turn On.
Factory Default is Off
If Supply Air Sensor is field installed, turn On.
Factory Default is Off
Resets the Air Handler to the Factory Default
Configuration by selecting Yes
Indications
XXXXCFM View Airflow Dipswitches
XXXXCFM View Heat Pump Airflow Dipswitch Settings
-10%, 0%, 10% View Airflow Trim Settings
Activate Dehumidification Feature
Comments
Comments