Rheem Comfort Control2 Installer's Manual page 26

Furnace User Menus (cont.)
Unit Info
Parameter
XXXX-
Model Number
XXXXXXXXXXXXXXXX
Serial Number XXXXXXXXXXXXXXXXXXX
Software Vers XXXXXX
Setup
Parameter
Heat Rise Adjust 55F, 65F
Min Heat Adj % -15, -7, 0, 7, 15
Max Heat Adj % -15, -7, 0, 7, 15
Supply Air Sens On, Off
Reset All Dflts No, Yes
26  Installer's Guide
Indications
Options
Change airflow to adjust heat temperature rise
Selectable Airflow Adjustments at 40% Firing
Rate
Selectable Airflow Adjustments at 100% Firing
Rate
Factory default is On, if Sensor is not installed
turn Off
Resets the Furnace to the Factory Default
Configuration by selecting Yes
Comments
Unit Model Number
Unit Serial Number (Not available
if control is replaced)
Control Software Version
Comments