Sony MD Walkman MZ-R70 Operating Instructions Manual page 66

Error
message
Hi DC in
HOLD
LOW BATT
MEM OVER
NO COPY
NO DISC
NO SIGNAL
P/B ONLY
PROTECTED • You tried to record or edit on a MD with the tab in
66
Meaning/Remedy
• Voltage of the power supply is too high (The
supplied AC power adaptor or the recommended
car battery cord is not used).
, Use the supplied AC power adaptor or the
recommended car battery cord.
• The recorder is locked.
, Slide HOLD against the arrow to unlock the
recorder (page 37).
• Batteries are weak.
, Charge the rechargeable battery or replace the
dry battery (page 53).
• You tried to record with the recorder placed where
it receives continuous vibration.
, Put the recorder on a stable place, and start
recording again.
• You tried to make a copy from a disc that is
protected by the Serial Copy Management
System. You cannot make copies from a digitally
connected source which was itself recorded using
digital connection.
, Use analog connection instead (page 18).
• You tried to play or record with no disc in the
recorder.
, Insert an MD.
• The recorder could not detect digital input
signals.
, Make sure that the source is connected firmly
(page 8).
• You tried to record or edit on a premastered MD
(P/B stands for "playback").
, Insert a recordable MD.
the record-protect position.
, Slide the tab back (page 58).