Advertisement
24
EN
f!:!P-aring ·a BatterY_( Sold SeP-arate
I~).._
_ _ _ _ _ _ _
Choose from the below batteries:
AA (R6) NiMH batteries (x 4)
AA (R6) alkaline batteries (x 4)
• AA (R6) manganese batteries cannot be used.
Loading Batteries
1
Open the battery compartment cover.
2
Insert the batteries with correct
+/- .
polarity.
3
Close the battery compartment cover.
Attaching to the Camera
Confirm that both the camera and electronic flash are off. Attaching or removing
the electronic flash while either the flash or the camera is on may result in
malfunction.
• Dirt or water on the contacts can cause malfunction. Remove dirt, water, and
other foreign matter before attaching the unit to the camera.
1
Keeping the latch release pressed, slide the latch
in the direction opposite to that shown by the
[LOCK~]
arrow to undo the latch (G)).
2
Slide the flash into the hot shoe until it clicks
securely into place
(®).
3
Slide the latch to the [LOCK~] position
(@).
• To remove the flash, undo the latch as described in Step
1 and slide the unit from tne camera.
Advertisement
