Preparation; Connecting The Power Source; Connecting The Hu-80 Hand Control Unit; Connecting The Supplied Foot Control Unit - Sony BM-87DST Marketing Operating Instructions Manual

Preparation

Connecting the Power Source

Rear
to the DC IN 9V jack
Connecting the HU-80 Hand Control Unit (not supplied)
For operation, refer to "Dictating" on page 13.
This way
Attaching the cradle
Attach the cradle which is supplied to the HU-80 to the left or right side of the unit. Place the HU-80
hand control unit on the cradle while not in use. Insert the cradle into the slots and slide to secure it.

Connecting the Supplied Foot Control Unit.

For operation, refer to "Transcribing" on page 17.
This way
10
to a wall outlet
AC power adaptor
(supplied)
Not this way
Left side
Not this way
Note on the AC power adaptor
Use only the AC power adaptor
(supplied). Do not use any other
AC power adaptor.
Polarity of the plug
to the CONTROL UNIT
connector
HU-80
Right side
to the CONTROL UNIT
connector
Foot control unit
(supplied)