Sony MZ-NH600 Operating Instructions Manual page 77

Message Meaning/Remedy
READ ERROR • The recorder cannot read the disc information correctly.
REC ERROR • Recording was not correctly done.
• The disc is soiled with an oil film or finger prints, is scratched, or is not a
SYSTEM FILE • The recorder is storing information (track start and end position) from the
WRITING
TEMP OVER • Heat has built up in the recorder.
REC STOP
TITLE FULL • You tried to enter more than 200 letters to label a single track, group, or
• You tried to enter a total of more than approximately 55,000 letters (in
TOC DATA • The recorder cannot read the disc information correctly.
ERROR
TRACK FULL • You tried to record more than 2,047 tracks on a disc in Hi-MD mode or
TrkFromPC NO • You tried to combine or divide tracks that were transferred from the
EDIT
• You tried to combine or divide tracks that were recorded in Hi-MD mode
TrkFromPC NO • You tried to record in the middle of a protected track that has been
REC
• You tried to record in the middle of a track that was recorded in Hi-MD
, Reinsert the disc.
, Place the recorder at a place with no vibrations and record again.
standard disc.
, Try recording again with another disc.
memory to the disk.
, Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.
, Let the recorder cool down.
disc.
Hi-MD mode) or 1,700 letters (in MD mode) for titles.
, Insert another disc.
, If it is no problem to erase the entire disc, do so (page 48).
more than 254 tracks on a disc in MD mode.
, Erase unnecessary tracks (page 47).
computer.
, You cannot combine or divide transferred tracks.
using the MD Simple Burner software.
, You cannot combine or divide tracks recorded in Hi-MD mode with
the MD Simple Burner software.
transferred from the computer.
mode with the MD Simple Burner software.
, You cannot record new material in the middle of a protected track or
a track that was recorded in Hi-MD mode with the MD Simple
Burner software.
77