Sony MZ-NH600 Operating Instructions Manual page 75

Message Meaning/Remedy
DISC FULL • Recording may not be done if the remaining recordable time on the disc
D-L READY • MD Simple Burner is now ready to record an audio CD to the disc in the
EJECT DISC OK • The recorder has finished communicating with the computer and it is safe
End • The recorder reached to the end of the disc while playing or pressing
ERROR • There is an internal malfunction in the system.
ERROR XX • There is an internal malfunction in the system.
FORMAT • A disc with a format that the recorder does not support was inserted.
ERROR DISC • A disc formatted on the computer was inserted.
GROUP FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th
HOLD • The recorder is locked.
LOW BATTERY • A battery is weak.
MEMORY • You tried to record with the recorder placed where it receives continuous
OVER
NO • You selected bookmark play without setting bookmarks.
BOOKMARK
TRACK
NO DIGITAL • You tried to make a copy from a disc that is protected by the Serial Copy
COPY
NO DISC • You tried to play or record with no disc in the recorder.
NO DISC • You tried to erase a setting in the Disc Memory on a disc that contains no
MEMORY
is 48 seconds or less.
, Replace the disc.
recorder using Simple mode (see "Software Operation").
to eject the disc from the recorder or disconnect the dedicated USB cable.
>.
, Restart the operation by doing steps 1 to 3 on page 73.
, Restart the operation by doing steps 1 to 3 on page 73. If the message
appears again, please consult your nearest Sony dealer.
, Insert a standard MD or a disc used in Hi-MD mode.
, When formatting a disc on the computer, make sure to use the
SonicStage software.
group on a standard disc.
, You can create only up to 255 groups (on a disc used in Hi-MD
mode) or 99 groups (on a standard disc) on a disc. Keep the group
number within 255 or 99.
, Slide HOLD against the arrow to unlock the recorder (page 13).
, Replace the dry battery (page 13).
vibration.
, Put the recorder on a stable place, and start recording again.
, Set bookmarks (page 36).
Management System. You cannot make copies from a digitally connected
source which was itself recorded using digital connection.
, Use analog connection instead (page 26).
, Insert a disc.
settings in the Disc Memory (page 53).
75