Sony MZ-NH600 Operating Instructions Manual page 73

Symptom
The recorder does
not work or works
poorly.
The display window
is not normal.
The operation mode
of the blank 60/74/
80-minute standard
disc differs from the
mode following
formatting or the
mode selected in the
SonicStage
software.
Cause/Remedy
• The disc is damaged or does not contain proper recording or editing
data.
, Reinsert the disc. Rerecord the disc. If the error message still
appears, replace it with another disc.
• There is a built-in malfunction in the system.
• While operating, the recorder received a mechanical shock, too much
static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Disconnect all the power sources and the dedicated USB cable.
2 Leave the recorder for about 30 seconds.
3 Connect the power source.
• The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operation buttons.
• When using a blank 60/74/80-minute standard disc in the recorder, the
operation mode set in the "Disc Mode" menu is applied.
, Use the "Disc Mode" menu to change the operation mode as
desired.
73