Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating Service Manual page 21

28) Select manual mode of the test mode, and set item number
778 (see page 14).
Set LCD display
7 78
: Adjusted value
[VOL +]
29) Adjust with the
key (adjusted value down) so that the adjusted value becomes
7D.
30) Press the X key to write the adjusted value.
31) Select manual mode of the test mode, and set item number
779 (see page 14).
Set LCD display
7 79
: Adjusted value
[VOL +]
32) Adjust with the
key (adjusted value down) so that the adjusted value becomes
7F.
33) Press the key to write the adjusted value.
X
34) Select manual mode of the test mode, and set item number
781 (see page 14).
Set LCD display
7 81
: Adjusted value
[VOL +]
35) Adjust with the
key (adjusted value down) so that the adjusted value becomes
81.
36) Press the X key to write the adjusted value.
37) Select manual mode of the test mode, and set item number
865 (see page 14).
Set LCD display
8 65
: Adjusted value
[VOL +]
38) Adjust with the
key (adjusted value down) so that the adjusted value becomes
2C.
39) Press the key to write the adjusted value.
X
40) Select manual mode of the test mode, and set item number
866 (see page 14).
Set LCD display
8 66
: Adjusted value
[VOL --]
key (adjusted value up) or
[VOL --]
key (adjusted value up) or
[VOL --]
key (adjusted value up) or
[VOL --]
key (adjusted value up) or
[VOL +]
41) Adjust with the
key (adjusted value down) so that the adjusted value becomes
B9.
42) Press the key to write the adjusted value.
X
43) Select manual mode of the test mode, and set item number
867 (see page 14).
Set LCD display
8 67
: Adjusted value
[VOL +]
44) Adjust with the
key (adjusted value down) so that the adjusted value becomes
C9.
45) Press the X key to write the adjusted value.
46) Select manual mode of the test mode, and set item number
868 (see page 14).
Set LCD display
8 68
: Adjusted value
[VOL +]
47) Adjust with the
key (adjusted value down) so that the adjusted value becomes
80.
48) Press the key to write the adjusted value.
X
49) Select manual mode of the test mode, and set item number
871 (see page 14).
Set LCD display
8 71
: Adjusted value
[VOL +]
50) Adjust with the
key (adjusted value down) so that the adjusted value becomes
CA.
51) Press the key to write the adjusted value.
X
52) Select manual mode of the test mode, and set item number
872 (see page 14).
Set LCD display
8 72
: Adjusted value
[VOL +]
53) Adjust with the
key (adjusted value down) so that the adjusted value becomes
2D.
54) Press the X key to write the adjusted value.
MZ-N707
[VOL --]
key (adjusted value up) or
[VOL --]
key (adjusted value up) or
[VOL --]
key (adjusted value up) or
[VOL--]
key (adjusted value up) or
[VOL --]
key (adjusted value up) or
21