Sony MDS-JS333ES Operating Instructions Manual page 51

Outputs
PHONES Jack type: stereo phone
Rated output: 28 mW
Load impedance: 32 ohms
ANALOG OUT Jack type: phono
Rated output: 2.5 Vrms (at 50
kilohms)
Load impedance: over 10 kilohms
DIGITAL OUT OPTICAL Connector type: square optical
Rated output: –18 dBm
Load impedance: 660 nm (optical
wave length)
DIGITAL OUT COAXIAL Jack type: phono
Rated output: 0.5 Vp-p (at 75 ohms)
Load impedance: 75 ohms
General
Power requirements
Where purchased Power requirements
U.S.A. and Canada 120 V AC, 60 Hz
Europe 230 V AC, 50/60 Hz
Power consumption
20 W
Dimensions (approx.) 430 123.5 375.5 mm (17 4
14
parts and controls
Mass (approx.) 10.5 kg (23 lbs 15 oz)
Supplied accessories
See page 10.
US and foreign patents licensed from Dolby Laboratories.
Design and specifications are subject to change without
notice.
7 /
8
7
/ in.) (w/h/d) incl. projecting
8
51
GB
Specifications