Hooking Up The Audio Components - Sony MDS-JS333ES Operating Instructions Manual

Hooking up the audio components

O
I
R
A
Amplifier, etc.
1) Digital equipment with a DIGITAL OUT connector only
2) Digital equipment with both DIGITAL IN and OUT connectors
Required cords
A Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
White (L)
Red (R)
B Optical cables (3) (not supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
C Coaxial digital connecting cables (2) (not supplied)
D I I I
O C O I O 1 O 2
R
C
CD player, DBS tuner, etc.
amplifier, DAT deck, MD deck, etc.
White (L)
Red (R)
CONTROL A1
D
C O R O
D I I O
1
O I C
C O I
B
,
1) Digital
2)
Hookup considerations
• Turn off the power of all components before making any
connections.
• Do not connect any AC power cord until all the
connections are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
components
Connect
Amplifiers
CD players or DBS tuners
Digital amplifiers, DAT decks,
or another MD deck
Hooking up the audio components
AC power cord
to a wall outlet
To the
ANALOG IN/OUT jacks
DIGITAL IN connector
DIGITAL IN/OUT connectors
11
GB