Varytec LED Ball RGBW 50cm 4x8W DMX User Manual page 42

Operating
Selecting the DMX mode.
LED Ball RGBW 50cm 4x8W DMX
42
LED ball
Press [MENU] and then [UP] or [DOWN] until the display shows 'DMX' .
With [UP] or [DOWN] you can now select one of the following DMX modes:
'2CH' (two channels)
n
'3CH' (three channels)
n
'4CH' (four channels)
n
'7CH' (seven channels)
n
n '9CH' (nine channels)
'14CH' (14 channels)
n
Confirm the desired selection with [ENTER].
This setting is only relevant when the device is controlled via DMX.