Varytec LED Ball RGBW 50cm 4x8W DMX User Manual page 36

Operating
Automatic show selection
Setting the microphone sensi‐
tivity for sound control
LED Ball RGBW 50cm 4x8W DMX
36
LED ball
Press [MENU] and then [UP] or [DOWN] until 'Stand Alone' is displayed and press [ENTER]. Press
[UP] or [DOWN] repeatedly, until the display shows 'Auto' and press [ENTER]. Use [UP] or
[DOWN] to select one of the two automatic shows (display shows 'Program 1' or 'Program 2' )
and select [ENTER]. To customize the speed and dimmer intensity of the selected show, use
[UP] or [DOWN] to select one of the following options:
Display
'Dimmer'
'Speed'
For the dimmer intensity, use [UP] or [DOWN] to select a value from '000' to '255' , or for the
programme speed a value from '000' to '100' and confirm it with [ENTER].
Press [MENU] and then [UP] or [DOWN] until 'Stand Alone' is displayed and press [ENTER]. Press
[UP] or [DOWN] repeatedly, until the display shows 'Sound' and press [ENTER]. Use [UP] or
[DOWN] to select either '000' (microphone off) or a sensitivity in the range of '01' (low) ... '99'
(high).
Meaning
Dimmer intensity
Programme running speed