Sony 4-166-309-11(1) Operating Instructions Manual page 17

• Before you start recording, we recommend you make a trial recording first, or monitor the
recording (page 26).
• While recording you can lock all the functions of all the buttons so that you can prevent
inadvertent operations by sliding the HOLD switch in the direction of the arrow.
P Notes
• While the operation indicator is flashing in orange, do not remove the batteries or connect or
disconnect the USB AC adaptor. Doing so may damage the data.
• Noise may be recorded if an object, such as your finger, etc., accidentally rubs or scratches the IC
recorder during recording.
• Before making a recording, be sure to check the battery indicator (page 10).
• To avoid replacing batteries during a long recording session, use a USB AC adaptor (not
supplied) (page 73).
Remaining memory indication
During recording, the remaining memory indicator decreases one by one.
The memory is
nearly full.
When the remaining time of recording reaches 10 minutes, the last one of the indication
flashes.
If the remaining recording time display mode is selected, the remaining recording time
display will also flash when the remaining time reaches 1 minute. The display will be
changed automatically to the remaining time display.
When the memory is full, recording automatically stops and
the display window for about 3 seconds. To continue recording, first erase some of the
messages.
Flashing
and "FULL" will flash in
17 GB