Table of Contents
Advertisement
Note
• The numbers on the digital
counter are memorized even
when the POWER switch is set
to STANDBY or a cassette is
being removed.
Notes
• The LTR signal should be
recorded with the intervals of
more than 6 seconds.
• Playback sound is muted while
the LTR signal is recorded.
However, the recorded material
will be protected.
• While the LTR signal is being
recorded with the SPEED
CONTROL selector set to ON,
the tape will run at normal tape
speed.
Digital Counter While Dictating
1 Tape counter: Numerical reference for recording and listening.
To set the digital counter to zero
We recommend that you press the RESET button before starting dictation.
Keep the RESET button pressed for about one second to reset the tape
counters to zero.
Convenient Functions
LTR (letter) signal
You can record electronic index signals on the tape while the unit is set in
recording (dictation), stop or playback (with the hand control unit) mode.
LTR (letter=end of document) signal: Record at the end of each
document.
When the AUTO STOP function (see page 13) is activated (AUTO STOP:
ON), the tape automatically stops at each index signal when it is rewound
or rapidly advanced. Documents can be located without the user's having
to listen to the entire tape.
• Before dictating, press RESET to reset the counters to zero.
To record the LTR signal
Press LTR on the hand control unit.
Each time the button is pressed, the LTR lamp
on the BM-845 lights up for about three seconds.
Recording time
Select the desired tape speed for recording with the use of the TAPE
SPEED selector.
2.4 cm:For optimum sound (recommended for normal use)
A 60-minute recording can be made using both sides of the MC-
60BM Microcassette.
1.2 cm:For longer recording time
A 120-minute recording can be made using both sides of the MC-
60BM Microcassette.
1
LTR
Continued on next page.
BM-845D. 3-859-341-11. U. E
Operations
9
Advertisement
Table of Contents
