Table of Contents
Advertisement
Operation Flow Chart
For details, refer to the pages in ( ).
: Necessary step
Dictation
4
Introduction
: Optional step
Connect the AC power adaptor to the unit and to an AC outlet (6).
.
Connect the hand control unit (6).
.
Set POWER to ON.
.
Insert a cassette (7).
.
Set TAPE SPEED.
.
Press RESET to set the digital counter to zero.
.
Set the function selector of the hand control unit to DICT.
Speak into the microphone.
Quick review playback and correct the dictated material.
Keep the function selector of the hand control unit pressed
down toward B. SPACE to rewind the tape until the desired
point on the tape is reached. Release the selector and playback
of the dictation begins. When the reviewing is completed, set
the function selector to DICT to proceed with dictation.
Record the LTR signal at the end of each document (9).
.
Set the function selector of the hand control unit to STOP.
.
Press the eject button to remove the cassette.
.
Hand the cassette to your secretary or transcriptionist.
.
BM-845D. 3-859-341-11. U. E
Advertisement
Table of Contents
