Table of Contents
Advertisement
Symptom
The operation indicator
does not light.
"FULL" is displayed and you
cannot start recording.
"FULL" is displayed and
you cannot operate the IC
recorder.
Recording is interrupted.
Noise is heard.
Recording level is low.
Remedy
"LED" is set to "OFF" (page 61). Display the menu and set "LED"
to "ON. "
The memory is full. Erase some of the messages (page 47).
99 messages have been recorded in the selected folder or
495 messages (when there are 5 folders) in total have been
recorded. Therefore you cannot record another message, or
move a message. Select another folder (page 23), or erase
some of the messages (page 47).
The VOR function (page 25) is activated. Set "VOR" to "OFF" in
the menu (page 58).
An object, such as your finger, etc., accidentally rubbed or
scratched the IC recorder during recording so that noise was
recorded.
The IC recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or
playback.
Plug of the connected microphone was dirty when recording.
Clean the plug.
The
(headphones) plug is dirty. Clean the plug.
Noise may be heard during VOR recording.
Noise may also be heard at the point where you add a
recording or overwrite a recording.
"SENS" (microphone sensitivity) is set to "
Display the menu and set "SENS" to "
. "
" (page 24).
GB
Hide quick links:
Advertisement
Table of Contents
