Audi AMB Service Manual page 41

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 53: Checking Torque Converter Is Correctly Positioned
Courtesy of VOLKSWAGEN UNITED STATES, INC.
If the torque converter has been correctly installed, the distance between bottom contact surfaces at threaded
holes in torque converter and joint surface on torque converter bell housing with automatic transmission 01V, is
approx. 23 mm.
If torque converter has not been completely inserted, this distance will be approx. 11 mm.
CAUTION: If the torque converter is incorrectly installed, the torque converter drive
or the ATF pump will be severely damaged when the transmission is
attached to the engine.
All models
Ensure that engine mounts are installed free of mechanical stress. To do so, shake engine to align it before

tightening engine mounts.
Install air conditioning compressor.

Install ribbed belt.

Vehicles with automatic transmission
Secure ATF lines: -->

37 - AUTOMATIC TRANSMISSION - CONTROLS, HOUSING for 5 SPD. AUTOMATIC

TRANSMISSION 01V
37 - AUTOMATIC TRANSMISSION - CONTROLS, HOUSING for 5 SPD. AUTOMATIC

TRANSMISSION 01V FRONT AND ALL WHEEL DRIVE - INTERNAL COMPONENTS,
SERVICING
37 CONTROLS, HOUSING for AUTOMATIC TRANSMISSION 09L, FOUR-WHEEL DRIVE

Stress-free alignment of exhaust system --> Exhaust system - vehicles with front wheel drive, aligning
stress-free.
Vehicles up to 06.03
2005 Audi A4 Quattro
1:00:56 AM Page 29