Audi AMB Service Manual page 392

ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
Fig. 78: Removing/Installing Bracket For Generator, Power Steering Pump And A/C Compressor At
Bolts
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Replace micro-encapsulated (threads coated with locking compound) collared bolts and position bracket

for generator, power steering pump and air conditioning compressor on cylinder block.
Tighten micro-encapsulated collared bolts in diagonal sequence:

1. Bolt M10 x 45
2. Bolt M10 x 75
3. Bolt M10 x 155
Only for replacement of bracket
Bolt idler wheel for ribbed belt to bracket for generator, power steering pump and air conditioning

compressor.
All models
To ease installation of power steering pump, knock back bushing on rear securing bolt slightly.

Install ribbed belt --> Ribbed belt, removing and installing.

Fill cooling system --> Cooling system, draining and filling.

See Caution for connecting Telematics battery --> Engine, disassembling and assembling
After connecting battery, enter radio anti-theft code. Radio operating instructions.

Use electric window lifters to completely close door windows.

2005 Audi A4 Quattro
2:33:16 AM Page 15