Parts Identification; Charging The Trimmer - Panasonic ER-GB42 Operating Instructions Manual

Parts identification

f
a
i
b
c
d
e
A Main body
a Water inlet
b Trimming height indicator
c Dial (Height adjustment
control)
d Power switch
e Appliance socket
Blade
B
f Cleaning lever
g Moving blade
h Stationary blade
i Mounting hook
C Comb attachment for beard
(1 mm to 10 mm)
8
中东亚洲.indb 8
l
g
k m
h
j
m
D AC adaptor (RE9-92)
(The shape of the
AC adaptor differs
depending on the area.)
j Charge indicator lamp
k Charging plug
l Cord
m Power plug
Accessories
E Cleaning brush
F Oil

Charging the trimmer

Make sure that the trimmer is turned off.
1
Place the trimmer on the AC
adaptor.
• Plug the trimmer into the AC adaptor
until it clicks into place.
• Remove the trimmer with one hand
while pressing the AC adaptor with the
other hand.
2
Insert the power plug into a
household outlet.
• The charging time differs depending on the rated voltage.
(See page 15.)
• Check that the charge indicator lamp glows.
3
Disconnect the plug after charging is completed.
(for safety and to reduce energy usage)
• The charge indicator lamp continues to glow after
charging is complete. There is no indication to show that
"charging is complete".
Notes
• To keep charging the battery will not affect battery
performance.
• If there is noise from the radio or other sources while
using or charging the product, move to a different
location to use the product.
• When the appliance is not used for 6 months or more,
the battery will weaken (leak battery fluid, etc.). Fully
charge the battery once every 6 months.
• You can charge the battery before it is completely
discharged. However, it is recommended to charge when the
battery is completely discharged. The battery life depends
strongly on factors such as how it is used and stored.
2
1
17/4/6 下午5:52