Connecting To External Systems Or Interfaces; Connecting Via Lon Works Bus - Honeywell CENTRA LINE LION CLLIONLC01 Installation & Commissioning Instructions

Connecting to External Systems or Interfaces

Connecting to External Systems or Interfaces
WARNING
Risk of electric shock or equipment damage!
Do not touch any live parts in the cabinet!
►
Disconnect the power supply before making connections
►
to or removing connections from terminals of controller or
I/O modules.
Do not reconnect the power supply until you have
►
completed installation.
Observe the rules regarding electrostatic discharge.
►
Connecting via L
ON
Via a L W Bus, a LION System can be connected to
ON ORKS
other controller systems, to additional L
modules, or to laptops.
L W Bus Termination
ON ORKS
Depending upon the configuration, either 1 or 2 termination
modules are required for terminating a L
FTT devices on it.
The following 2 different L
available for this purpose:
• 209541 L
W Bus Termination Module and
ON ORKS
• XAL-Term L
W Connection and Termination
ON ORKS
Module, which can be mounted on DIN rails and in fuse
boxes
EN1Z-0921GE51 R0709
W Bus
ORKS
W Bus I/O
ON ORKS
W bus with
ON ORKS
W termination units are
ON ORKS
Termination Examples
Brown
Orange
Yellow
Fig. 42 Termination Module 209541 connections for a
doubly-terminated FTT network
Fig. 43 Termination Module 209541 connections for a
singly-terminated FTT network
Fig. 44 XAL-Term Connection and Termination Module
32
LION System
Brown
Orange
Yellow