LION System
Wiring and Setting Up the System
Commissioning I/O Modules
Commissioning Panel Bus I/O Modules
During engineering, the HEX address of the Panel
I/O modules is defined.
Note
With Panel Bus I/O modules it is essential that the HEX
switch be set to the address assigned by the engineering
tool.
The CLLIONLC01 Controller automatically commissions all
Panel Bus I/O modules.
Commissioning L
W
Bus I/O Modules
ON
ORKS
Commissioning is done using the engineering tool.
Updating Software
CARE is used to update the CLLIONLC01 Controller.
Software with Panel Bus I/O Modules
The CLLIONLC01 Controller automatically updates all Panel
Bus I/O modules.
Software with L
W
Bus I/O Modules
ON
ORKS
You can update the L
W
I/O modules using CARE or
ON
ORKS
EXCELON.
31
EN1Z-0921GE51 R0709