Additional Control Options
•
Other control options such as dither, slope control, dimming mode,and temperature sensor are
available by User Config.
•
If temp_mon_en is set, die temperature can be read by window below:
•
If brightness mode is selected to use brightness register as a brightness input, not PWM input signal,
base brightness can be controlled by window below.
•
Control windows below can be used for independent dimming where each LED string is controlled
independently. See the LP8863-Q1 data sheet for independent dimming control.
12
The LP8863EVM Evaluation Module
Copyright © 2017, Texas Instruments Incorporated
www.ti.com
SNVU558 – February 2017
Submit Documentation Feedback