Section 2: Device Information Section 3: Installation Mounting Considerations ................6 Installing a Casing Mounted Asset Management Tag ........7 Installing a Yoke Mounted Asset Management Tag ........8 Installing a Universal Mounted Asset Management Tag ......... 8 Section 4: Related Documents...
Emerson Asset Management Tag. The instruction manual also describes using Asset Connect software to access information on the Asset Management Tag. Refer to the Asset Connect Quick Start Guide for information on how to use this downloadable application as well as information on requirements for the reader/writer, and PC or tablet.
Asset Management Tags can be ordered as an accessory on an assembly or can be purchased individually for existing in-field equipment to be populated utilizing Asset Connect software or with the support of your Emerson sales office and service center.
ATA Spec 2000 SAE AS5678 DIN 40050-9 Education Services For information on available courses for the Asset Management Tag, as well as a variety of other products and services, contact: Emerson Automation Solutions Educational Services - Registration Phone: +1-641-754-3771 or +1-800-338-8158 e-mail: education@emerson.com...
Installation, Operation and Maintenance Manual Section 2: Device Information D104482X012 May 2019 Section 2: Device Information Available fields for stored information on the Asset Management Tag are shown below in figure 2. Figure 2 Asset Management Tag Storage Fields Device Information...
Emerson sales office and service center. If the Asset Management Tag assembly is being installed on process equipment in the field, observe all installation warnings, cautions, and notes provided in the Instruction Manuals for all applicable equipment.
D104482X012 May 2019 The Asset Management Tag is pre-affixed to the bracket and must remain installed as an assembly for optimal read range. Three mounting styles have been engineered to optimize read range as well as provide mounting flexibility onto a wide range of equipment, reference table 2 for assembly part numbers.
Reference figures 3 and 4 above. Ensure that mounting of the Asset Management Tag, does not prevent full thread engagement of the casing bolting. If mounting the tag prevents complete thread engagement, mount using a longer casing bolt of the same material specification.
Management Tag. Mount auxiliary bracket to available actuator yoke connection. Install Asset Management Tag assembly to the mounted auxiliary bracket by placing bolt through the top and follow with washer and nut on the bottom side of the auxiliary bracket and tighten.
Section 6: Kits The Asset Management Tag is pre-affixed to the bracket and must remain installed as an assembly for optimal read range and ease of installation for all three mounting styles.
Page 13
Installation, Operation and Maintenance Manual Section 6: Kits D104482X012 May 2019 Brand Actuator Model Actuator Size Part Number Mounting Type List Price 45/45i 50/50i GE89294X012 70/70i 657, 657-4 GE89296X012 GE89297X012 30/30i 34/34i 40/40i GE89295X012 Casing 46/46i 60/60i 76/76i 667, 667-4 45/45i 50/50i GE89294X012...