Playing MDs
This chapter explains the various ways to
play MDs.
Playing an MD
POWER
1
Turn on the mixer.
2
Adjust the fader or level of the connected channel
of the mixer.
3
Press POWER to turn on the recorder.
4
Insert an MD.
5
If necessary, turn AMS (or press ./>
repeatedly) to locate the track you want to start
playing from.
If you want to play from the first track, go to step 6.
6
Press 7.
The recorder starts playing.
Operations you may want to do during play
To
Stop play
Pause play
Resume play after pausing 7
Locate a succeeding track
Locate the beginning of
the current track or
a preceding track
Eject the MD
z
To play the MD on which LP2, LP4 stereo recording or MONO
recording has been performed
By pressing 7 in step 6 above, "LP2," "LP4," or
"MONO" lights up depending on the mode recorded
on the lower left of the display window.
z
To use headphones
Connect them to PHONES jack. Turn PHONE LEVEL
to adjust the volume.
AMS
Press or turn
x
7
AMS clockwise (or press >
repeatedly)
AMS counterclockwise (or
press . repeatedly)
After stopping play A
27