Adding Memory - Sony PCG-FX210 Primary User Manual

Adding Memory

In the future you may want to install memory modules to expand the
functionality of your computer. You can increase memory up to 256 MB
(128 MB x 2), by installing optional memory modules. The amount of memory
pre-installed is 128 MB (128 MB x 1).You can add an expansion memory module
(64 MB or 128 MB) in the memory module bay. Expansion memory modules are
available as options. For memory upgrades, use only PC100 (CL2) SDRAM SO-
DIMM (gold lead contacts).
Make sure you observe the proper safety precautions when you install memory mod-
ules in your computer. See the bulleted list below. Be careful when adding memory.
Mistakes when installing or removing a memory module may cause a malfunction.
Before you start
❑
The procedures described below assume you are familiar with the general
terminology associated with personal computers and with common safety
practices required for using and modifying electronic equipment.
❑
Disconnect your system from its power source and from any
telecommunications links, networks, or modems before you open the system
or follow any of the procedures described below. Personal injury or
equipment damage may result from failure to take these precautions.
❑
Electrostatic discharge (ESD) can damage memory modules and other
components. Perform the procedures described below only at an ESD
workstation. If such a station is not available, do not work in a carpeted area,
and do not handle materials that produce or hold static electricity
(cellophane wrappers, for example). Ground yourself by maintaining contact
with an unpainted metal portion of the chassis while performing the
procedure.
❑
Do not open the memory module package until you are ready to install the
module. The package protects the module from ESD.
❑
Use the special bag for preventing ESD or use aluminum foil when you store
the memory module.
85