Connecting An I.link® Device - Sony PCG-FX210 Primary User Manual

Change to Current Document Title
Connecting an i.LINK
You can connect an i.LINK enabled digital video camera recorder to
the i.LINK® S400 (IEEE1394) connector.
To connect a digital video camera recorder
❑
Plug one end of the i.LINK cable (not supplied) into the i.LINK connector
on the left side of the computer and the other end into the DV In/Out
connector on the digital video camera recorder.
✍
i.LINK cables compatible with your VAIO notebook include cables with the following
part numbers: VMC-IL4415 (a 1.5-meter cable with a 4-pin connector at each end),
VMC-IL4615 (a 1.5 meter-cable with a 4-pin connector at one end and a 6-pin
connector at the other), and VMC-IL4408A (a 0.8-meter cable with a 4-pin connector
at each end). You can purchase these cables from your local retailer, through the Sony
VAIO® Direct Web site (http://www.sonydirect.com), or by calling 1-888-315-7669 (toll
free).
Connecting digital video camera recorder to i.LINK connector
Digital video
camera recorder
To DV In/Out
* i.LINK is a Sony trademark used to designate that a product contains an IEEE 1394 connec-
tor. All products with an i.LINK connector may not communicate with each other.
74
®*
Device
To i.LINK
i.LINK cable
(optional)