Iiyama Vision Master Pro 413 Service Manual page 12

Press MENU Key to Quit the OSD window. Mean while the new setting data will be saved in the
memory.
E. To switches the input signal to the other Timing Mode. Please follow step C ~ D to get the optimum
picture.
F. Select the "
will be returned to the original OSD window.(user's operating condition)
G. The setting data of the CONTRAST, BRIGHTNESS, PIN-BALANCE, PARALLELOGRAM,
ROTATION, COLOR TEMPERATURE are common mode saved in the memory. Don't needed
adjust it individual at every timing Mode and save in the memory.
H Model select: for factory only, service engineer can't changed.
3. White Balance, Luminance adjustment:
A. Press OSD key for more than 10 minutesm enter factory preset pattern.
B. Set R, G, B gain DAC 70, R, G, B bias 10.
C. Raster Pattern, Brightness
,R-Bias
/x=260±10, y= 290± 10.(HF703*/HM704*/HM703*)
D. Adjust Brightness DAC to make the raster cut off (Y<1.4cd/m
E. Little white pattern, Contrast set to max, Brightness DAC set to 50, adjust R or G or B gain to
MAX, to make x=283±15,
2
Y=145± 15cd/m
(HM704*/HF(A)703*). Then save to 9300K color temperature
F. Little white pattern, Contrast set to max, Brightness DAC set to 50, adjust R or G or B gain to
MAX, to make x=313±10, y=329±150, Y=135± 15cd/m
2
Y=135± 15cd/m
(HM704*)/ x=313±15, y=328±15, Y=140± 15cd/m
temperature.
G. Little white pattern, Contrast set to max, Brightness DAC set to 50, adjust R or G or B gain to
MAX, to make x=313±10, y=329±150, Y=140± 15cd/m
2
Y=125± 15cd/m
(HM704*/HF(A)703*)Then save to 5000K color temperature.
H. Select " OPQ " function to ON.
I. Adjust R.G.B gain to make x=283±15,
y=297±15, Y=145± 15cd/m
J. Adjust R.G.B gain to make x=313±10, y=329±150, Y=135± 15cd/m
y=328±15, Y=135± 15cd/m
save to 6500K color temperature
K. Adjust R.G.B gain to make x=313±10, y=329±150, Y=140± 15cd/m
y=352±15, Y=125± 15cd/m
L. Exit factory preset mode and select OPQ function to disable.
M. All white pattern, Brightness and Contrast set to MAX, adjust VR701 to make Y=105±10cd/m
N. All white pattern, Brightness set to 50 and Contrast set to MAX , adjust R or G or B gain to make
x=313±15, y=329±15, Y=80± 16cd/m
I. After adjustment , CHECK white balance.
4.Focus Adjustment:
A. Set mode 2 1024×768 Fh: 31.5KHz with character full page.
B. Adjust brightness to center and contrast to max.
C. Then adjust focus VR1 to a fine vertical line.
D. Adjust focus VR2 to a fine horizontal line.
" RETURN function and press the MENU Key, then the Factor Preset window
and Contrast
and G2 to make the color temperature /x=283±10, y= 297± 10.(HA703*)
y=297±15, Y=140± 15cd/m
2
(HM704*/HF(A)703*)., Then save to 9300K color temperature.
2
(HM704*)/ x=313±15, y=328±15, Y=140± 15cd/m
2
(HM704*/HF(A)703*), Then save to 5000K color temperature.
2
(HF(A)703*)/ Y=80± 10cd/m
.!21!.
set to maxinum, then adjust G-Bias
2
).
2
(HM703*)/x=283±15, y=297±15,
2
(HF(A)703*)/x=313±15, y=328±15,
2
(HM703*). Then save to 6500K color
2
(HM703*)/x=345±15, y=352±15,
y=297±15, Y=140± 15cd/m
2
(HM704*)
,B-Bias
2
(HM703*)/x=283±15,
2
(HF(A)703*)/x=313±15,
2
(HM703*)., Then
2
(HM703*)/x=345±15,
2
.