Transmitter Rf Power; Interference Detection; Advanced Rf - Shure ULX-D Manual

To recall a saved preset: DEVICE UTILITIES > SYSTEM RESET > RESTORE
Use the control wheel to select the preset name, and then press Enter.
RF

Transmitter RF Power

Reference the following table for setting RF Power:
RF Power Setting
1 mW
10 mW
20 mW
Note: Using the 20 mW setting decreases the transmitter battery runtime and reduces the number of compatible systems.

Interference Detection

Interference Detection monitors the RF environment for potential sources of interference which can cause audio dropouts.
When interference is identified, the RF LEDs illuminate red and the following warning displays on the receiver LCD panel.
If the warning display persists or the audio drops out repeatedly, perform a Scan and Sync at the first opportunity to find a clear
frequency.

Advanced RF

RF Mute
System Range
33 m (100 ft.)
100 m (330 ft.)
>100 m (330 ft.)
Application
For increased channel reuse at close distances
Typical setups
For hostile RF environments or long­distance ap­
plications
Shure Incorporated
28/48