Note: When complete, SYNC SUCCESS! appears. The transmitter and receiver are now tuned to the same frequency.
Multiple System Setup
A setup using networked receivers is the fastest and easiest way to distribute the best open channel to each system. See Net
working ULX-D Receivers for networking details.
Note: Networked receivers must all be within the same frequency band.
Networked Receivers
1.
Turn on all receivers.
Conduct a group scan on the first receiver to find available frequencies in each group: SCAN > GROUP SCAN.
2.
3.
Press ENTER to accept the group number and automatically assign the next best channel to each receiver on the net
work. The receiver LEDs will flash when a frequency has been assigned.
4.
Turn on a transmitter and sync to the receiver.
Important! Leave the transmitter on and repeat this step for each additional system.
Shure Incorporated
26/48