The Numeric Codes Corresponding To The Component And The Make Of The Component - Sony SAVA-D900 Operating Instructions (primary manual) Operating Instructions Manual

Note
If the function button does not light up, the batteries are weak.
Replace both batteries.
To reset all function buttons to their factory
settings
Press down ?/1, AV ?/1 and MASTER VOLUME –
simultaneously, or uninstall the batteries once and press
any key, then install them again.
The Numeric Codes
Corresponding to the
Component and the Make
of the Component
Use the numeric codes in the tables below to control non-
Sony components. Since the remote signal that a
component accepts differs depending on the model and
year of the component, more than one numeric code may
be assigned to a component. If you fail to program your
remote using one of the codes, try using other codes.
The function button to which you can assign a button is in
parentheses on top of each table.
Notes
• The numeric codes are based on the latest information available
for each brand. There is a chance, however, that your
component will not respond to some or all of the codes.
• All of the functions on this remote may not be available when
used with your particular component.
To control a TV (the TV function button only)
Make Code(s)
DAEWOO 000, 001, 002, 003, 004, 005
FISHER 010, 011
LG (GOLDSTAR) 012, 013, 014, 015, 016, 017
GRUNDIG 020, 021
HITACHI 012, 025, 026, 027
ITT/ NOKIA 028, 029
JVC 030, 031, 032
MAGNAVOX 012, 013, 036, 037
MITSUBISHI/ MGA 012, 013, 040, 041
NEC 012, 013, 042
PANASONIC 045, 046, 047, 048
PHILIPS 016, 036
PIONEER 047, 050, 051, 052
RCA/ PROSCAN 012, 013, 045, 053, 054, 055, 056
SAMSUNG 012, 013, 016, 017, 037, 060
SANYO 010, 011
SHARP 037, 065, 066
TELEFUNKEN 071, 072, 073, 074
THOMSON 073, 080
TOSHIBA 050, 065, 081
ZENITH 085, 086
Continued to the next page
61