Changing The Spectrum Analyzer; Display; Adjusting The Brightness Of The Display; Changing The Power Illuminator - Sony MHC-LX10000 Operating Instructions (MHC-LX10000) Operating Instructions Manual

Changing the spectrum
analyzer display
1
Press AMP MENU repeatedly to select
"SPECTRUM".
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
T
SPECTRUM 1
Y
SPECTRUM OFF
R
SPECTRUM 4
t
3
Press ENTER.
Adjusting the brightness
of the display
1
Press AMP MENU repeatedly to select
"DIMMER".
The last selected dimmer setting appears in
the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
t
DIMMER OFF
t
DIMMER 2*
* DIMMER 2 is the darkest.
3
Press ENTER.
t
SPECTRUM 2
Y
SPECTRUM 3
R
T
y T
DIMMER 1
T
Changing the power
illuminator
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN 4 t
PATTERN OFF
Notes
• When you turn MASTER VOLUME (or press
VOLUME +/– on the remote), power illuminator
shows the current volume level.
• During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
25 US