Waking Up To Music; Play Timer - Sony MHC-LX10000 Operating Instructions (MHC-LX10000) Operating Instructions Manual

Micro & mini shelf systems: high power mini hi-fi system
Hide thumbs Also See for MHC-LX10000 Operating Instructions (MHC-LX10000):
Table of Contents

Advertisement

Waking up to music

— Play Timer

You can wake up to music at a preset time. Make
sure you have set the clock (see "Setting the
clock" on page 8).
Use buttons on the remote for the operation.
1
Prepare the music source you want to
play back.
• Disc: Load a disc. To start from a specific
track, make a program (see "Creating
your own program" on page 11).
• Tape: Load a tape with the side you want
to play back facing forward.
• Radio: Tune in the preset station you
want (see "Listening to the radio" on
page 15).
2
Press VOLUME +/– to adjust the
volume.
3
Press CLOCK/TIMER SET.
"SET" appears in the display, then "PLAY
SET?" flashes in the display.
4
Press ENTER.
"ON" appears and the hour indication
flashes in the display.
5
Set the time to start playback.
Press –. or >+ repeatedly (or turn
.> on the unit clockwise or
counterclockwise) to set the hour, then
press ENTER.
The minute indication flashes in the
display.
Press –. or >+ repeatedly (or turn
.> on the unit clockwise or
counterclockwise) to set the minute, then
press ENTER.
6
Set the time to stop playback following
the same procedure as step 5.
US
22
7
.
>
Press –
or
.>
turn
on the unit clockwise or
counterclockwise) until the music
source you want appears in the
display.
Each time you press the button, the display
changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8
Press ENTER.
The type of timer ("PLAY TIMER"),
followed by the start time, the stop time and
the music source appears in the display.
9
Press ?/1 to turn off the system.
Other operations
To
Do this
1
Check
Press CLOCK/TIMER SELECT.
the setting
"SELECT" appears in the display.
2
Press –. or >+ repeatedly
(or turn . > on the unit
clockwise or counterclockwise) to
select "PLAY SELECT?", then
press ENTER.
Change
Start from step 1.
the setting
1
Cancel
Press CLOCK/TIMER SELECT.
the timer
"SELECT" appears in the display.
2
Press –. or >+ repeatedly
(or turn . > on the unit
clockwise or counterclockwise) to
select "TIMER OFF?", then press
ENTER.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The Play Timer will not be activated if the system is
turned on.
Tips
• The system turns on 15 seconds before the preset
time.
• When the Play Timer is selected, "PLAY" lights up
in the display.
+ repeatedly (or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents