To Start Recording - Panasonic Lumix DC-FZ10002 Basic Operating Instructions Manual

Set mode dial to [
1
Set the menu
2
→
Settings: [40SEC] / [20SEC] / [OFF]
Set the crop start frame and press [MENU/SET] to set
3
• Set the crop end frame as well.
• When making settings for the first time, a crop start frame of size
1920×1080 is displayed.
• Move the frame by touching it or using the cursor button. You can
adjust the frame size by pinching out/pinching in or rotating the
rear or front dial.
Press the motion picture button (or the shutter button)
4

to start recording

Elapsed recording time
Set operating time
• Immediately release the motion picture button (or the shutter
button) after pressing it.
• When the set operating time has elapsed, recording
automatically ends. To end recording midway, press the motion
picture button (or the shutter button) again.
●
When you want to zoom in/out, set different angles of view for the cropping start and end frames.
For example, to zoom in, set a larger angle of view for the start frame and a smaller angle of view
for the end frame.
■
Changing the position and size of a crop frame
Press [Fn7] button while the recording screen is displayed, and perform step
■
To cancel [4K Live Cropping] recording
Set [OFF] in step
2
●
[4K Live Cropping] recording cannot be performed when [High Speed Video] is set.
●
Focus is adjusted and fixed in the crop start frame.
●
[Continuous AF] is set to [OFF].
●
[Metering Mode] will be [
●
You cannot zoom in/out during [4K Live Cropping] recording.
]
[Creative Video] → [4K Live Cropping]
.
] (Multi Metering).
Recording
Start Start
Size Size
Reset Reset
.
3
DVQX1795 (ENG)
Set Set
51